Products

VS 11/12 High Performance Electric Steel Strapping Heads
VS 11 12-VS 11/12 High Performance Electric Steel Strapping Heads The electric Titan VS12 strapping head combines the most advanced drive and control mechanisms with the latest standards of the proven Titan seal less joint technology and functional modular design.

The drives of the VS11 and VS12 strapping head are equipped with robust electric motors. With the integrated frequency inverters, the head can be used with voltages of 200 to 240V at 50/60Hz. The inverters also control the operation and the output of the motor through programmable parameters.

The Titan VS12 strapping head uses the Tungsten inert gas (TIG) welding process already widely used in the automotive industry around the world. The welds are made contactless by an electric arc under inert gas. A Tungsten electrode strikes the arc, which melts and joins the two overlapped strap parts.

Advantages

  • Achieve up to 90% joint efficiency
  • Fully automated strapping heads
  • Available in sealless and spot weld joint
  • Advanced drive and control mechanisms
  • Proven Technology
  • Reliable and Robust
  • Functional modular designs
  • Suitable for steel, brick and lumber applications
Advantages of the spot weld joint
  • Maximum safety through single welds delivering sealing performances of up to 90% of the breaking load of the strap
  • Safe, electronically controlled operation of the electrode.
  • Full penetration welding even in case of corroded and lacquered straps
  • Cold and flat joint, limiting possible damage to the package
  • No transfer of heat onto the package during the welding process
Technical Information

  • Available in ½” to ¾” strap sizes and .015” to .025”(13 to 19mm x .38 to .64mm)
  • All electric drive configuration
  • Single spot weld joint, up to 85% efficiency
  • Feed and take-up rate to 8.2fps (2.0mps)
  • Minimum strap surface: 2.9” flat, 6” bundle diameter ( 75mm to 150 mm)